Similar to Shawn's SB-1000, I found a bass also in need of some new electronics and a pickup. The bass in question is a 1980 RSB-900, which is basically an SB-1000 with a different headstock and oval inlays. This bass has clearly been played and played hard. Check out the battle scars in the photo link. The pickup and electronics were both dead so I ordered new ones from Aria USA. After my friend Lance wired everything up, it sounds good as new! The new electronics are built a little differently, but they do sound pretty much the same as the originals. If you have an SB (or RSB) that has fried electronics or pickups, I highly recommend the Aria replacements to get back to the original tone. One last note, since these old RSB-900s didn't have an LED for the BB Circuit, I had Lance drill a hole to accommodate the LED that comes with the Re-Issued version. For more pictures of the bass than anyone really needs, go here!
Thursday, November 11, 2010
RSB-900 Electronics Restoration
Similar to Shawn's SB-1000, I found a bass also in need of some new electronics and a pickup. The bass in question is a 1980 RSB-900, which is basically an SB-1000 with a different headstock and oval inlays. This bass has clearly been played and played hard. Check out the battle scars in the photo link. The pickup and electronics were both dead so I ordered new ones from Aria USA. After my friend Lance wired everything up, it sounds good as new! The new electronics are built a little differently, but they do sound pretty much the same as the originals. If you have an SB (or RSB) that has fried electronics or pickups, I highly recommend the Aria replacements to get back to the original tone. One last note, since these old RSB-900s didn't have an LED for the BB Circuit, I had Lance drill a hole to accommodate the LED that comes with the Re-Issued version. For more pictures of the bass than anyone really needs, go here!
Monday, November 8, 2010
Aria Pro II SB-1000 Wiring Schematics and Info
Naturally, I think Aria Pro II SB-1000s are some of the best basses around, classics even. However, they are somewhat notorious for suffering from pickup and/or BB circuit problems. As the vintage models are now 25-30 years old, this is somewhat to be expected. I've read about problems on several different bass guitar forums and people always wanted a schematic from which to try and solve the problem with. Nobody could ever seem to be able to find one, though. Hopefully this will no longer be the case as Aria USA was kind enough to send me the original SB-1000 BB Circuit diagram and marketing info. I also have the SB-1000 Re-Issue schematic (thanks Shawn!) for those of you who may have problems or questions about the newer models.
"Orion" Bass Cover
Not only does fellow Aria aficionado Seo do a fine job of modifying basses to look like Cliff Burton's Black 'n' Gold (pictured above), but he also does a superb job of covering Cliff's epic swan song, "Orion". He made the recording using his SB-1000CB which was converted to look and sound more like an SB-Black 'n' Gold I. Seo used Metallica's original guitar and drum tracks to go along with his bass work. Great job!